Mace Doppler Ultrasonic Flow Sensors

Includes FREE

• UPS Ground Shipping
• Lifetime technical support

Mace Doppler ultrasonic flow sensors are compatible with the Mace AgriFlo, FloPro and HVFlo ultrasonic flow meters as well as the HydroMace 3000 Datalogging Monitor. These sensors are available in four styles depending upon your meter and application.

Strap Mount (Velocity Only) Sensor:

This sensor is used to measure velocity in full pipes when access to the pipe is available and the pipe can be emptied when installation or maintenance is required. It can also be used in situations where the user is measuring depth by a third party or ultrasonic sensor. The sensor is first mounted on a polypropylene mounting strap and then installed within the pipe.

• Material type: P.V.C.
• Pipe sizes: 150mm (6") to 2000mm (79")
• Dimensions: 125mm (5") L x 50mm (2") W x 16mm (0.62") H
• For use with AgriFlo, FloPro, HVFlo and HydroMace 3000

Strap Mount Velocity/Depth Sensor:

This type of sensor is used in open channels or pipes that run partially full. This sensor is used to measure depth (using a capacitive pressure diaphragm) and velocity. Access to the monitoring point is required for installation and maintenance. The sensor is first mounted on a polypropylene mounting plate and then installed within the pipe or channel

• For use with AgriFlo, FloPro, HVFlo and HydroMace 3000

Depth Sensor:

This type of sensor is a depth only strap mount sensor that is typically used to measure the depth of a surcharge event in a sewer system manhole or depth over a weir or flume.

• Material type: P.V.C.
• Pipe sizes: 150mm (6") to 2000mm (79")
• Dimensions: 125mm (5") L x 50mm (2") W x 16mm (0.62") H
• Depth range: 4m (158"), 10m (394")

Insert Sensor (Velocity Only):

Insertion sensors require access to the outside wall of the pipe in which the sensor is to be mounted. These sensors can be installed through a 2 inch ball valve or just through a 2 inch female thread fitting.

• Material type: Nickel plated Brass (standard), 316 Stainless Steel (optional)
• Thread type: Either 2" BSP or 2" NPT
• Pipe sizes: 100mm (4") to 2000mm (79")
• Dimensions: 355mm (14") L x 45mm (1.8") dia. x 25mm (1") H
• For use with AgriFlo, FloPro, HVFlo and HydroMace 3000

Required Components These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.
	Mace FloSeries3 External Communications Leads Serial connection or USB option, one is required for FloSeries3 products	Starting at $85.00
Accessories Please consider these optional accessories.
	Mace FloSeries3 FloSI Module Serial interface card supporting ModBus, SDI-12, RS-232 and RS-485	$520.00
	Mace FloSeries3 EchoFlo Ultrasonic Depth Sensor Non-contact depth measurement for partially-full pipes	Starting at $660.00