Need Help? Call us M-F 8 AM to 6 PM ET 1-800-884-4967

Features

  • Manufactured by Oakton Instruments
  • Dual display shows both pH (or mV) and temperature
  • Three-point pH calibration with auto buffer recognition
  • Selectable buffer sets
  • Single button press to switch from pH to mV readings
  • 0.1 mV resolution for ORP measurements
  • Selectable manual or automatic temperature compensation
  • Built-in memory function
  • Analog recorder output
The Oakton pH 510
meter requires an
Oakton ORP Electrode
to take mV readings.

The Oakton pH 510 meter offers laboratory-quality readings for a very economical cost. The dual display shows both pH (or mV) and temperature readings. The Oakton pH 510 meter's plus mode indicators and annunciators are used to signal meter status.

There is a three-point pH calibration with auto buffer recognition. The Oakton pH 510 meter is set to calibrate at 4.01, 7.00, and 10.01 for high accuracy across the entire measuring range. Buffer sets are selectable, options include USA or NIST buffer sets.

The Oakton pH 510 meter has the ability to switch from pH to mV readings with a single button press. Featuring 0.1 mV resolution for ORP measurements, the Oakton pH 510 meter is available with a built-in electrode stand that holds the electrode firmly in place. Temperature compensation control is selectable with a manual or automatic setting for high accuracy with or without a temperature sensor.

The Oakton pH 510 meter has a built-in memory function that stores up to 50 pH, mV, or relative mV readings with corresponding temperature. The analog recorder output makes it possible to create hard copies of your readings. Other features of the Oakton pH 510 meter include hold function, "Ready" indicator and diagnostic error messages.

The Oakton pH 510 meter also comes with a slide-out instruction card for quick reference.

pH meters require regular calibration to perform at their optimal level. We strongly suggest purchasing pH calibration solutions. We offer both calibration kits and individual solutions to meet your needs.

Probes
Oakton ORP Electrodes
Used with pH meters for mV readings
Starting at
$77.00
$61.60
Oakton pH Electrodes
Oakton pH Electrodes
Starting at
$47.00
$37.60
Solutions
Oakton pH Buffers "Singles" Kit
Assortment of single-use pH buffers
$32.00
Oakton pH Calibration Solutions Kit
pH calibration kit including 4.01, 7.00 and 10.00 buffers
$36.00
Oakton pH Solutions Starter Kit
4.01, 7.00 and 10.00 pH buffers along with cleaning and storage solutions
$62.00
Oakton pH Buffer Solutions
One-pint buffer solutions & singles buffer pouches
Starting at
$12.25
Oakton pH/ORP Electrode Cleaning Solution
Extend the life of your electrodes and maintain accurate readings
$12.35
Oakton pH/ORP Electrode Storage Solution
Extend the life of your electrodes and maintain accurate readings
$16.50