GE Protimeter MMS Plus Moisture Meter
Moisture meter for wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry, and other building materials
This product has been retired.
Need Help? Call us M-F 8 AM to 8 PM ET 1-800-884-4967
Features
- Manufactured by GE Protimeter
- Automatic grains-per-lb calculations for specific humidity
- Data logging with PC interface
- Interchangeable with HygroStick or QuickStick probes
- Optional low range RH probe from 1% to 40% RH
- Warranty: 24 months on mechanical or manufacturing defects
Includes FREE
The moisture you cannot see matters most when cleaning and restoring a property after water damage from storms, floods, or fires. From hidden mold to unseen structural damage, undetected moisture damages health and property, and its oversight can create liability. That's why the right moisture meter makes the difference.
The GE Protimeter MMS Plus moisture meter is a complete moisture measurement system in one easy-to-use robust instrument.
Features of the GE Protimeter MMS Plus Moisture Meter
- Hygrometer mode measures relative humidity, ambient temperature, dew point and grains per pound with either a replaceable Hygrostick™ or QuickStick™ probe
- Pin measure mode determines moisture content of wood and Wood Moisture Equivalent (WME) in other building materials
- Pinless measure mode uses radio frequency to detect moisture non-invasively
- Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of building structures
- Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures
Use your GE Protimeter MMS Plus moisture meter to search behind ceramic tiles, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete, and concrete blocks. Hygrometry checks the dehumidification process and monitors buildings for adequate ventilation affecting indoor air quality.
- Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface
- Search mode not adversely affected by surface moisture
Addition Applications of the GE Protimeter MMS Plus Moisture Meter
- Measures moisture in concrete floors using ASTM F2170-02
- Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound
- Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions
BLD5800LH - GE Protimeter MMS Plus moisture meter kit with Hygrostick/Software Package includes:
- Data download software with cable (BLD5810)
- Hygrostick (POL4750) Range 30-100%, ideal for concrete applications
- Surface temperature sensor (BLD5804)
- 5" (127 mm) insulated deep wall probes (BLD5018)(BLD5060)
- Calibration check device (BLD5086)
- HygroStick/QuickStick ext. lead, 30" (76 cm), (BLD5802)
- Instructions and nylon zipper pouch
- Wood species calibration table
- One year parts and labor warranty
BLD5800HS - GE Protimeter MMS Plus moisture meter kit with QuickStick/Software Package includes:
- Data download software with cable (BLD5810)
- QuickStick (POL8750) Range 0-100%, fast responding)
- Surface temperature sensor (BLD5804)
- 5" (127 mm) insulated deep wall probes (BLD5018)
- Pin moisture probe and QuickStick lead (BLD5060)
- Calibration check device (BLD5086)
- HygroStick/QuickStick ext. lead, 30" long ( 76 cm) (BLD5802)
- Instructions and nylon zipper pouch
- Wood species calibration table
- One year parts and labor warranty
Documents
Specifications
| Wood Moisture Range | 60 to 1000 (relative) |
|---|---|
| Other Building Materials | Pin: (WME) 8% to 99, readings over 30% are relative |
| Accuracy | N/A |
| Operating Temperature | N/A |
| Power Supply | 2 AA Batteries (Included) |
| Dimensions | 7x2.75x1.9in (180x70x49mm) |
| Sensor Type | Pin and non-invasive |
| Weight | Instrument only: 10.58oz (300 g)
Complete kit: 2.5lb (1.1 kg) |
| Max Resolution | N/A |
| Max. Measurement depth | Non-invasive: up to 3/4 in (19 mm)
Pin: 0.4 in (10 mm) |
| Display | LCD |
| Memory | Up to 1,000 results |
|
Accessories
Please consider these optional accessories.
|
||
|---|---|---|
|
Replacement pin needles 1" (25mm) (20 pack)
|
$29.00 $26.10 |
|
Calcheck device for pin-type meter range
|
$13.00 $11.70 |
|
Deep Wall Probes - 9.5" (240 mm)
|
$68.00 $61.20 |
|
4" (100mm) EIFS Probe
|
$110.00 $99.00 |
|
1 pair replacement needles for BLD5070 EIFS Probe
|
$34.00 $30.60 |
|
Heavy duty two pin moisture probe and lead
|
$55.00 $49.50 |
|
Two-pin moisture probe and lead
|
$18.00 $16.20 |
|
Allows temperature measurement in wood and automatic temperature compensation when used in conjunction with the Protimeter TimberMaster.
|
$137.00 $123.30 |
|
|
Deep Wall Probes - 5" (127mm)
|
$63.00 $56.70 |
|
Hammer electrode needles for BLD5000 - pack of 10
|
$52.00 |
|
Heavy Duty Protimeter Hammer Electrode
|
$222.00 $199.80 |
|
Hammer Electrode Needles for BLD5055 (pack of 10)
|
$80.00 $72.00 |
|
The Protimeter book on dampness diagnosis, treatment and available measurement techniques.
|
$31.00 $27.90 |