GE Panametrics
At the heart of GE Panametrics is process industrial measurement. Panametrics brand instruments provide solutions for moisture, oxygen and hydrogen analysis as well as ultrasonic flow measurement. Instruments from Panametrics can be used in flow, gas, moisture, and humidity applications. see more
GE Panametrics portable and fixed installation aluminum oxide hygrometers measure trace moisture in both gases and liquids. GE Panametrics gas analyzers leverage many modern technologies for use in many applications. Panametrics portable and fixed installation transit-time ultrasonic flowmeters can be applied to liquids, gases, and steam with either clamp-on or wetted transducers.
GE Panametrics is part of the GE Sensing division.
- CATEGORIES
- Combustion Analyzers (2)
- Dewpoint Meters (7)
- Energy Meters / Btu Meters (4)
- Flow Meters (17)
- Gas Detectors (1)
- Humidity / Dewpoint / Moisture Calibrators (1)
- Humidity Meters / Hygrometers (4)
- Moisture Meters (11)
- Oxygen Transmitters / Analyzers (8)
|
|
Starting at $10.70 |
|
Replacement universal power supply/battery charger with cable and connector
|
$154.00 |
|
Pt1000 surface mount RTDs with transmitter
|
Starting at $640.00 |
|
OD measuring tape with English (inch) and Metric (cm/mm) scale
|
$16.50 |
|
Analog input and output bale; 6 foot length; Lemo connector (console) to flying lead (8 pin) for the TransPort PT878
|
$108.00 |
|
Portable sample system for moisture analysis using the PM880 hygrometer
|
Starting at $1,190.00 |
|
Soft carrying case for GE Panametrics PT878
|
$136.00 |
|
Hard carry case for PT878
|
$600.00 |
|
Spare Oxygen Sensor for the GE Panametrics O2X1 Oxygen Transmitter
|
Starting at $210.00 |
|
|
Pair of coaxial signal cables for the GE Panameterics AquaTans AT868 and DigitalFlow DF868
|
Starting at $91.75 |
|
IRDA communication cable with USB connector for PC to PT878 and PM880 communications
|
$182.00 |
|
|
Oxygen sensor, heater, thermocouple assembly, 120 VAC, high temperature for FGA311 Transmitter
|
$1,930.00 |
|
Measures moisture concentration in gases from trace to ambient levels
|
Starting at $1,950.00 |
|
|
Standard 10ft probe cable with connector for "M" series probe required for use with PM880 Portable Hygrometer
|
$305.00 |
|
Coated aluminum inserts for use with C-RS transducers
|
$95.00 |
|
|
Couplant, for use with thickness gauge, glycerin - 2 oz squeeze bottle (0.06 liters) for use at temperatures up to 200 deg F (90 deg C)
|
$24.00 |
|
|
Standard Cable for "M" Series Probes
|
Starting at $75.30 |
|
IRDA communication cable with DB9(F) connector for PC to PT878 and PM880 communications
|
$108.00 |
|
|
Flowmeter with valve, 0-5 SCFH, (0-2500 cc/min), stainless steel, 200 psig max for FGA311 Oxygen Transmitter calibration gas
|
$550.00 |
|
|
Package of 5 replacement filters elements for 190 filter coalescer
|
$73.00 |
|
|
PM880 battery charger for 230 VAC
|
$360.00 |
|
|
Pair of small pipe dual transducer cables, 25 foot length with Microdot to LEMO connectors for use with CF-LP style clamp-on transducers and PT868 or PT878
|
$192.00 |
|
|
Factory-performed NIST calibration
|
$880.00 |
|
|
PanaView with IRDA communication cable with DB9(F) connector for PC to PT878 and PM880 communications
|
$760.00 |
|
|
Extension cable with BNC male and BNC female connectors, 25 ft
|
$55.00 |
|
|
Thermal Compound for use with RTD's
|
$24.50 |
|
|
Solid foil couplants for waveguide to pipe interface
|
Starting at $315.00 |
|
|
Standard Cable with Connector for MIS Probe
|
Starting at $81.10 |
|
|
Battery pack for PM880 Hygrometer
|
$415.00 |
|
|
Zirconium oxide oxygen sensor assembly for OxyTrak 390 Flue Gas Analyzer, standard gases
|
$1,350.00 |
|
|
Plastive alkaline battery pack, uses 6 AA batteries, for use with PT878. (Batteries not included)
|
$63.00 |
|
|
Clamping fixture with stainless steel brackets ranging from 3 to 24 inches
|
Starting at $2,740.00 |
|
|
3 Amp Fuse For 12-28 VDC Units. For use with DF868 Flow Meter.
|
$1.37 |
|
|
Standard 10ft probe cable with connector for three function (TF) probe required for use with PM880 Portable Hygrometer
|
$460.00 |
|
|
Zener Barrier to provide Intrinsic Safety for O2X1 Transmitter
|
$460.00 |
|
Replacement test block , 2-step, 303 stainless steel, Metric, 3.0mm - 30.00 mm
|
$96.00 |
|
Long carry case for UC-F-X-24-0 or magnetic clamping fixtures
|
$215.00 |
|
|
Extension cable with BNC male and BNC female connectors, 100 ft
|
$225.00 |
|
|
K-Type Thermocouple for OxyTrak 390 Flue Gas Analyzer
|
$340.00 |
|
|
Standard Cable for TF Series Probe
|
Starting at $329.20 |
|
|
Portable printer, with universal charger / AC adapter, battery pack , carry pouch, thermal paper and US style power cord
|
$1,600.00 |
|
Replacement test block, 2-step, 303 stainless steel, English, .200" - 1.500"
|
$96.00 |
|
|
Replacement battery pack for the printer used with the PT878
|
$255.00 |
|
|
Zirconium oxide oxygen sensor assembly with manifold (standard wall mount design) for CGA351 Oxygen Analyzer, includes 705-950-02
|
$1,880.00 |
|
|
Cable gland for XMTC
|
$183.00 |
|
|
Pair of 0.5 MHz frequency C-ET Transducers
|
$2,500.00 |
|
|
Sacrifice fitting, 1/4" swagelok process connection 316SS
|
$33.00 |
|
|
Fuse holder for DF868 Flow Meter.
|
$2.75 |
|
|
Terminal Block - 8 Pin For Isolated Analog Input Board and Frequency Totaliser Board. For use with DF868 Flow Meter.
|
$22.00 |
|
|
9-Pin Terminal Block for Alarm Board. For use with DF868 Flow Meter.
|
$23.00 |