GE Inspection Technologies
- CATEGORIES
- Non Destructive Testing (NDT) Equipment (10)
Showing 1 to 50 of 91 products. 12
|
High stability and repeatability at normal and elevated temperatures, designed for the harshest environments
|
Starting at $1,484.00 |
|
Compact and waterproof featuring single-hand operation
|
$1,296.00 |
|
Easy-to-use precision thickness measuring for automotive and aerospace industries
|
Starting at $3,185.00 |
|
Pocket-size rebound hardness tester standardized to ASTM A 956
|
Starting at $3,170.00 |
|
Electrical conductivity meter for checking non-ferrous metals for identity, grade and material conditions, datalogger option available
|
Starting at $5,337.00 |
|
Portable for on-site UCI (Ultrasonic Contact Impedance) method hardness testing, MIC 10DL datalogger option available
|
Starting at $5,542.00 |
|
Light and portable ultrasonic flaw detector for prolonged operation in the oil and gas, aerospace, power generation and automotive industries
|
Starting at $6,825.00 |
|
Ultrasonic thickness gauge suited for a wide range of applications including measuring for corrosion in the oil and gas sector and in power generation
|
Starting at $3,478.00 |
|
Portable rebound hardness tester, DynaMIC DL datalogger option available, and choice of impact device
|
Starting at $6,453.00 |
|
Combined hardness tester for quasi-static UCI hardness testing and dynamic hardness testing according to the rebound method
|
$6,556.00 |
| Accessories | ||
|
Datalogger upgrade for DM5E ultrasonic thickness gauge
|
$799.00 |
|
|
Data management software for thickness gauges with datalogger option
|
$300.00 |
|
|
Calibration blocks for PocketMIKE
|
Starting at $180.00 |
|
|
Probe cable with right angle Lemo connector
|
$68.00 |
|
|
Steel test block for the DM5E ultrasonic thickness gauge
|
$180.00 |
|
|
Standard delay line proce, 15 MHz, 0.25" diameter
|
$455.00 |
|
|
Standard contact probe, 5 MHz, 0.50" diameter
|
$375.00 |
|
|
Test block for the DM5E ultrasonic thickness gauge
|
$180.00 |
|
|
Mitutoy flat-jaw type digimatic caliper model # 500-171
|
$296.00 |
|
|
For the CL5 thickness gauge
|
$49.00 |
|
|
Small diameter delay line probe, 20 MHz, 0.125" diameter
|
$529.00 |
|
|
AutoSigma 3000 Probe Cable
|
$221.00 |
|
|
|
$66.00 |
|
|
Rubber boot and hand strap for the DM5E thickness gauge
|
$110.00 |
|
|
Pencie probe, 20 MHz with 0.065" and 0.090" diameter delay tips
|
$611.00 |
|
|
|
$106.00 |
|
|
Handheld standard probe for 1, 5 or 10kgf load and includes reference plate, cable and probe handle
|
Starting at $4,116.00 |
|
|
Replacement cable for the impact devices associated with hardness testers
|
$115.00 |
|
|
Interface cable for connecting your datalogging instrument to a computer
|
$156.00 |
|
|
Upgrade for DM5E Basic ultrasonic thickness gauge
|
$586.00 |
|
|
9-Pin Serial Cable to Mini 9D-Sub for the CL5 thickness gauge
|
$99.00 |
|
|
For the CL5 thickness gauge
|
$218.00 |
|
|
Replacement operating manual for the DynaPocket rebound hardness tester
|
$30.00 |
|
|
For use with DA 590 high-temperature probe
|
$114.00 |
|
|
Straight probe with 0.50 inch tip diameter, 60 and 500 kHz frequency for eddy current testing
|
$882.00 |
|
Dyna D, Dyna G, or Dyna E impact device for rebound hardness testers, with corresponding new impact body
|
Starting at $1,248.00 |
|
|
Ultrasonic thickness gauge upgrade for an existing USM Go flaw detector
|
Starting at $1,944.00 |
|
|
Fingertip contact probe, 10 MHz, 0.25" diameter
|
$358.00 |
|
|
|
$68.00 |
|
|
For use with DA 590 high-temperature probe
|
$119.00 |
|
|
Cable from CL5 thickness gauge to Mitutoyo caliper #573-251-10
|
$152.00 |
|
|
Conductivity set-up block for AutoSigma 3000 Eddy Current Tester
|
$250.00 |
|
|
Plastics delay line probe, 22 MHz, 0.25" diameter
|
$489.00 |
|
MIC-D62 or MIC-G38 hardness reference block for hardness testers
|
Starting at $615.00 |
|
|
100, 300 or 800 gram load motor probe and includes reference plate, cable and narrow probe guide
|
Starting at $5,318.00 |
|
|
Package of 10 delays for Alpha-2 DFR probe
|
$61.00 |
|
|
|
$65.00 |
|
|
5 spherical support rings for Dyna D and Dyna E devices, order individually or in a set
|
Starting at $85.00 |
|
|
Package of 10 delays for Alpha-A-2-Mini DFR probe
|
$93.00 |
|
|
Rubber boot and hand strap for the CL5 thickness gauge
|
$120.00 |
Showing 1 to 50 of 91 products. 12