|
Full featured insulation resistance and continuity tester with extensive results storage capability
|
|
|
Compact, lightweight, designed for testing high-voltage electric equipment
|
|
|
Digital Low Resistance Ohmmeter With a Range of 0.1µΩ to 2000Ω
|
Starting at $3,195.00 $2,619.90 |
|
Insulation resistance tester designed for testing high-voltage electric equipment
|
|
|
CAT IV insulation resistance and continuity tester with PI, DAR and switch probe
|
|
|
Insulation resistance tester designed for testing high-voltage electric equipment
|
|
|
Digital/analog Insulation tester less than 8 inches tall
|
Starting at $369.00 $302.58 |
|
2% ±3 digit accuracy with 3 point measurement
|
Starting at $805.00 $660.10 |
|
Insulation resistance tester designed for testing high-voltage electric equipment
|
|
|
Resolution to 0.1 μΩ on 599.9 μΩ range
|
Starting at $3,725.00 $3,054.50 |
|
Designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirements.
|
Starting at $679.00 $536.41 |
|
Ground resistance tester measures without disconnecting the ground
|
|
|
Measures up to 400 A a.c., ±1.5% of reading
|
|
|
Insulation resistance testers with digital or analog display
|
Starting at $535.00 $438.70 |
|
Insulation testing up to 1000 V and 200 GΩ, Analog arc and dual digital display
|
|
|
High-Pot Testers designed for development, maintenance or production testing
|
Starting at $2,220.00 $1,820.40 |
|
Resistances ranging from 0.1μΩ to 1Ω, test currents from 10 amps up to 200 amps
|
|
|
Insulation resistance testers with digital/analog display
|
Starting at $629.00 $515.78 |
|
Compact, portable, air insulated, uses no oil, ±2% accuracy
|
Starting at $3,455.00 $2,833.10 |
|
ART measurement 5% accuracy, resistance range 0.01 ohms to 200 kΩ
|
Starting at $1,649.00 $1,352.18 |
|
Major Megger MJ tester, hand-cranked low voltage brushless a.c. generator, cranking speed between 130 rpm and 170 rpm
|
|
|
Compact, lightweight, designed for testing high-voltage electric equipment
|
|
|
Insulation testing up to 1000 V and 200 GΩ, Continuity testing at 200 mA or 20 mA down to 0.01
|
|
|
Handheld micro-ohmmeter outputs up to 220A high currents up to 220 A
|
Starting at $6,600.00 $5,412.00 |
|
Compact, lightweight, designed for testing high-voltage electric equipment
|
|
|
Insulation resistance tester with digital/analog display
|
|
|
Ground resistance tester with USB interface for data downloading
|
|
|
Typically less than 0.5% error ±2 digits, Six cable measurement options
|
Starting at $860.00 $705.20 |
|
10 Amp Digital Low Resistance Ohmmeter
|
|
|
2% ±3 digits accuracy, resistance range 0.01 ohms to 20 kΩ
|
Starting at $1,299.00 $1,065.18 |
|
Measures float current and the harmonic content of the ripple current.
|
|
|
Determines condition of lead-acid and NiCd cells up to 7000 Ah
|
|
|
Monochrome, wide range, dual channel cable fault meter
|
Starting at $3,369.00 $2,762.58 |
|
15 to 12,000 ft range; ±2% accuracy
|
|
|
Continuously variable test voltage, rugged field construction, circuit-breaker protection
|
Starting at $3,590.00 $2,943.80 |
|
Measuring earth electrode resistance and soil resistivity, High resolution 1mΩ
|
|
|
Test voltage in 1V increments from 10V to 100V
|
|
|
AC Leakage Clampmeter with a 30mA to 300 A range, 0.01 mA resolution and 40 mm jaw size
|
|
|
Cable Route Tracer with compact control box and swivel head
|
|
|
Major Megger MJ tester, dual operation, 120 V 50/60 Hz mains (line) supply and
rechargeable battery with internal charger
|
|
|
Seven models, measure up to 550kV, continuous monitoring
|
Starting at $910.00 $746.20 |
|
Major Megger MJ tester, dual operation, hand-cranked low voltage brushless a.c. generator or 120
V 50/60 Hz mains (line) supply
|
|
|
Test currents from 10A to 200 ADC, 300 test results and notes
|
|
|
Appliance tester for testing the safety of electrical equipment
|
|
|
0 to 599.9µΩ range, with current-reversing switch to average out voltage offset.
|
|
|
Appliance tester that tests ground continuity, leakage current, and electrical insulation.
|
|
|
Evaluate the capability of link connections and locate faults up to 500 meters
|
|
|
Hand crank or battery powered, Max reading of 20 GΩ, four output test voltages
|
|
|
Portable unit for field use, suitable for all oil breakdown testing to 60kV
|
|
|
200 A AC Open Jaw current measurement, versatile fork multimeter
|
|