|
Non-contact ultrasonic level switch, controller, and transmitter for small tanks
|
|
|
General purpose, two-wire ultrasonic level transmitter for non-contact measurement for liquid levels up to 32.8'
|
|
|
General purpose ultrasonic sensor providing non-contact level measurement
|
|
|
The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via free WebCal software.
|
|
|
General purpose two-wire ultrasonic level transmitter for non-contact level measurements up to 32ft
|
|
|
Continuous non-contact level measurement up to 49.2in (1.25m)
|
|
|
Intrinsically safe, two-wire ultrasonic transmitter provides non-contact level measurement up to 18' in hazardous environments
|
|
|
Non-contact level detection to 26.2' with integral 3-channel relay control
|
|
|
FM and CSA approved intrinsically safe, the loop powered level indicator displays engineering units connected in series with one 4-20 mA continuous level transmitter.
|
|
|
Explosion proof, two-wire ultrasonic level transmitter for non-contact level measurement up to 10m
|
|
|
General purpose, non-contact ultrasonic level switch and controller for small tanks
|
|
|
The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via free Webcal software.
|
|
|
The general purpose float level transmitter provides continuous level measurement up to 6.5’ (2m) with a 4-20 mA signal output
|
|
|
The general purpose LD31 submersible pressure level transmitter provides continuous level measurement up to 46’ (14m) of water column with a 4-20 mA signal output.
|
|
|
The Flowline DeltaView LI55 Level Controller displays engineering units with one 4 to 20 mA or 0 to 10 VDC continuous level sensor input.
|
|
|
The general purpose LD32 submersible pressure level transmitter provides continuous level measurement up to 46’ (14m) of water column with a 4-20 mA signal output.
|
|
|
General purpose, three-wire ultrasonic transmitter provides non-contact level measurement up to 24'
|
|
|
The general purpose external pressure level transmitter is offered in two styles of termination and provides continuous level measurement up to 69’ (21m) of water column with a 4-20 mA signal output.
|
|
|
General purpose, multi-channel controller for a wide range of monitoring and control applications
|
|
|
Single Tank Level Indicator with 2 relays, 1 to 3 set points and an isolated analog repeater
|
|
|
CSA approved explosion proof for hazardous environments, the loop powered level indicator displays engineering units connected in series with one 4-20 mA continuous level transmitter
|
|
|
General purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output
|
|
|
Simple low-cost level switch solution for basic applications, offered in both vertical and horizontal mounting configurations
|
|
|
Baffle body and stabilized float dampen out switch chatter, submersible polypropylene or PVDF sensor and cable for corrosive liquids
|
|
|
Mechanically actuated float switch intended for automatic start / stop of electrical components, submersible polypropylene body
|
|
|
Non-Intrusive Capacitance Level Switch, level detection through plastic or fiberglass walls, polyethylene, polypropylene or PVDF adhesive 3M mounting brackets
|
|
|
Compact level switch, two configurations for pump and valve control, fail safe relay control of pumps or valves with 0-60 second delay
|
|
|
CSA approved intrinsically safe for use in hazardous environments, Submersible polypropylene or PFATeflon® sensor and cable for corrosive liquids
|
|
|
Three configurations for pump and valve control, fail-safe relay control of pumps or valves with 0-60 second delay
|
|
|
Multi-point float level switch package for high temp and pressure, 316 stainless steel float, guide and process mounting plug
|
|
|
Compact flow switch, reliable low flow or no flow detection of relatively clean non-coating media with a 16A relay
|
|
|
Fail-safe relay control of pumps or valves with 0-60 second delay, Offered in 3 sensing technologies: ultrasonic, vibration & buoyancy
|
|
|
Remote Flow Switch, offered in two configurations for low-flow pump and process protection, fail-safe relay control of pumps or valves
|
|
|
Submersible polypropylene or PFA Teflon sensor and cable for corrosive liquids, fail-safe leak sensor inverts wet to alert user for maintenance
|
|
|
Compact flow switch w/ fail-safe relay control of pumps or valves w/ 0-60 second delay, provides one 16A relay for low-flow pump or process protection
|
|
|
316 SS level sensor for high temp and pressure applications, dry contact reed switch selectable NO or NC via float orientation
|
|
|
Valox sensor body with PP float and Halar jacketed cable for corrosive liquids, Flat/low profile sensor with minimal float
|
|
|
Guard circuit optimizes performance in coating type media, submersible polypropylene sensor body and cable for corrosive liquids
|
|
|
Portable, 9V battery powered LED alarm with test switch, Single or two-point alarm for 55, 30 and 20 gallon drums
|
|
|
Small-Bore Pressure Level Transmitter, corrosion resistant 316 SS transducer with polyurethane or ETFE cable
|
|
|
Mercury-free self counter-weighted float switch, submersible polypropylene body and PVC cable for corrosive liquids
|
|
|
Reliable liquid level detection of dirty liquids such as those with light to medium coating, scaling or foaming characteristics with a 1A relay output
|
|
|
Provides reliable, multi-point liquid level detection up to 10’ (3m) with 1-4 adjustable level switch points and a compact junction box
|
|
|
Level switch, Polypropylene or PVDF single-point package for corrosive liquids, fail-safe relay control of pumps or valves with 0-60 second delay
|
|
|
Liquid level detection with one 1A relay and a compact junction box for integral wiring termination, for corrosive liquid applications
|
|
|
Welded 316 SS body, provides continuous level measurement up to 100’ (30.4m) of water column with a 4-20mA signal output.
|
|
|
Installation fittings for Flowline Level Transmitters
|
|
|
Facilitates communication between WebCal software and Flowline level transmitters
|
|
|
NEMA Box, Two Indicator, Windowed 1/8" DIN
|
|
|
|
|